Journal Title：Flow Measurement And Instrumentation

Flow Measurement and Instrumentation is dedicated to disseminating the latest research results on all aspects of flow measurement, in both closed conduits and open channels. The design of flow measurement systems involves a wide variety of multidisciplinary activities including modelling the flow sensor, the fluid flow and the sensor/fluid interactions through the use of computation techniques; the development of advanced transducer systems and their associated signal processing and the laboratory and field assessment of the overall system under ideal and disturbed conditions.

FMI is the essential forum for critical information exchange, and contributions are particularly encouraged in the following areas of interest:

Modelling: the application of mathematical and computational modelling to the interaction of fluid dynamics with flowmeters, including flowmeter behaviour, improved flowmeter design and installation problems. Application of CAD/CAE techniques to flowmeter modelling are eligible.

Design and development: the detailed design of the flowmeter head and/or signal processing aspects of novel flowmeters. Emphasis is given to papers identifying new sensor configurations, multisensor flow measurement systems, non-intrusive flow metering techniques and the application of microelectronic techniques in smart or intelligent systems.

Calibration techniques: including descriptions of new or existing calibration facilities and techniques, calibration data from different flowmeter types, and calibration intercomparison data from different laboratories.

Installation effect data: dealing with the effects of non-ideal flow conditions on flowmeters. Papers combining a theoretical understanding of flowmeter behaviour with experimental work are particularly welcome.

《流量測量與儀器》致力于傳播有關流量測量各個方面的最新研究成果，包括封閉管道和明渠。流量測量系統的設計涉及多種多學科活動，包括通過使用計算技術對流量傳感器、流體流動和傳感器/流體相互作用進行建模；開發先進的傳感器系統及其相關信號處理，以及在理想和受干擾條件下對整個系統進行實驗室和現場評估。

FMI 是重要信息交流的重要論壇，特別鼓勵在以下感興趣的領域做出貢獻：

建模：將數學和計算建模應用于流體動力學與流量計的相互作用，包括流量計行為、改進的流量計設計和安裝問題。將 CAD/CAE 技術應用于流量計建模是符合條件的。

設計和開發：流量計頭的詳細設計和/或新型流量計的信號處理方面。重點關注識別新傳感器配置、多傳感器流量測量系統、非侵入式流量計量技術以及微電子技術在智能系統中的應用的論文。

校準技術：包括對新或現有校準設施和技術的描述、來自不同流量計類型的校準數據以及來自不同實驗室的校準比對數據。

安裝效果數據：處理非理想流動條件對流量計的影響。特別歡迎將對流量計行為的理論理解與實驗工作相結合的論文。

Flow Measurement And Instrumentation創刊于1989年，由Elsevier BV出版商出版，收稿方向涵蓋工程技術 - 工程：機械全領域，此刊是中等級別的SCI期刊，所以過審相對來講不是特別難，但是該刊專業認可度不錯，仍然是一本值得選擇的SCI期刊 。平均審稿速度 較慢,6-12周 約19.8周，影響因子指數2.3，該期刊近期沒有被列入國際期刊預警名單，廣大學者值得一試。